Pairing and Assigning Printer on Castle S1F
Pairing and Assigning Printer on Castle S1F
Click Settings > Printer Devices
Check that your Printers are assigned correctly.
To assign Printer to your in-built Castle S1F, click on the unassigned printer.
A pop-up box will appear. Select “58mm” and “GBK”.
Click OK.
Select “Image” in the next pop-up box.
Click Confirm.
- END -
Related Articles
Pairing and Assigning Sunmi Cloud Printer, using Bluetooth
<space> On the Sunmi Cloud Printer hardware > Power On > press and hold for 3 seconds Pairing Button > release > subtle sound of a motor from the Printer Wait greeting message from Printer "Welcome to the era of intelligent cloud printing". After ...Pairing and Assigning Sunmi Cloud Printer, using LAN
<space> Plug LAN cable into the Sunmi Cloud Printer hardware > Power On > press Pairing Button three times quickly > see print out with IP address Wait greeting message from Printer "Welcome to the era of intelligent cloud printing". After triple ...IP address on your Epson Printer
<space> 1) Power off your device On the Printer, turn off the power button <space> 2) Press and hold the Feed Button + followed by powering it back on On the Feed Button > press and hold > do not let go While holding onto the Feed Button > turn back ...User Guide for Nets Castle S1F device
User Guide for Nets Castle S1F device You can download the User Guide for Nets Castle S1F device here. - END -Pairing and Assigning GPrinter GP-2120TU (Label Sticker)
Connect the Power to the Printer > leave it near the POS. On the POS Hardware > Settings > Bluetooth > connect device Customers queue to Order, Purchase at the counter, then pay before their food is served. [Heading 3] Examples : Fast Food, Bubble ...